11
(6)
Check whether the setting in (5) calibration
Downlink
：
0237020000000000000000 //X axis
0237030000000000000000 //Y axis
Response
：
823702000A000000010000 //X axis (Current configuration)
823703000A000000010000 //Y axis (Current configuration)
(7) Clear all Channels calibration
Downlink
：
0300000000000000000000
Response
：
8300000000000000000000
（
Configuration success
）
Note:
1. When Multiplier is not 1, Calibration value = DeltValue*Multiplier.
2. When Divisor is not 1, Calibration value = DeltValue/Divisor.
3. The choices of the Channel would be 00-03 Channel
4. With different sensor type, it is forbidden to use that same Channel number.
5. This universal calibration supports calibration of positive and negative numbers.
Example for MinTime/MaxTime logic:
Example#1
based on MinTime = 1 Hour, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange=0.1V
MaxTime MaxTime
Sleeping(MinTime)
Sleeping(MinTime)
Note: MaxTime=MinTime. Data will only be report according to MaxTime (MinTime) duration regardless BatteryVoltageChange
value.
Wake up and collects data
REPORTS 3.6V
Wakes up and collects data
REPORTS 3.6V
Wakes up and collects data
REPORTS 3.6V
