9
1. R718PA8 has the built-in magnet (as the figure below) which can be
attached to the surface of an iron object during installation, which is
convenient and quick.
In order to make the installation firmer, please use screws
(purchased separately) to fix the device to the wall or other surface
(as Figure below).
Note: Do not install the device in a metal shielded box or in an
environment surrounded by other electrical equipment to avoid
affecting the wireless transmission of the device.
2. R718PA8 regularly reports data that is pH value and the
solution temperature according to MaxTime. The default
Max Time is 3 minutes.
Note:
MaxTime can be modified by the downlink command, but
it is recommended not to set the interval too short.
R718PA8 can be applied to detecting the pH value and the
solution temperature Example:
Water Quality Monitor
Industrial Sewage Disposal
Agricultural Irrigation/Aquaculture
Swimming Pool/Hot Spring
Screw Fixation
Screw Fixation
