background image

 

 

1.

 

Introduction 

 

The R718E series equipment is a device that detects the three-axis acceleration and temperature of the ClassA type device of the Netvox LoRaWAN 
open protocol. When the device moves or vibrates over threshold value, it immediately reports the acceleration and speed and temperature of the X, Y, 
and Z axes. The device is compatible with the LoRaWAN protocol. 
 
LoRa Wireless Technology: 
LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other communication methods, 
LoRa spread spectrum modulation method greatly increases  to  expand  the communication distance.  Widely used in  long-distance,  low-data wireless 
communications.  For  example,  automatic  meter  reading,  building  automation  equipment,  wireless  security  systems,  industrial  monitoring.  Main 
features include small size, low power consumption, transmission distance, anti-interference ability and so on. 
 
LoRaWAN: 
LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability between devices and gateways from different 
manufacturers.   

2. Appearance

 

                                                         

   

                                                                      Fig.1    R718E    Appearance

 

       

 

 

 

 

 

 

Содержание R718E









Отзывы: