5
5. Data Report
Data report configuration and sending period are as following:
Min Interval
(Unit:second)
Max Interval
(Unit:second)
Reportable Change
Current Change
≥
Reportable Change
Current Change
＜
Reportable Change
Any number between
1~65535
Any number between
1~65535
Can not be 0.
Report
per Min Interval
Report
per Max Interval
When the device is turned on, it will immediately send a version package.
The transmission frequency of sending version package is once every 24 hours.
Data will be reported once per hour by default setting.
Default setting:
Maximum time: 3600s
Minimum time: 3600s
Battery: 0x01 (0.1V)
Disabletime:0x001E (30s)
Detectiontime:0x001E (30s)
*The setting of 2-gang is same.
*
DisableTime must
≧
5s ,
Detection Time must
≧
DisableTime .
Pressure detecting
：
R313WA is equipped with two-gang seat occupancy sensor.
When the seat occupancy sensor detects changes with the pressure status R313WA will report.
When the seat is taken, report 1.
When the seat is not taken, report 0.
Note:
The reported data is decoded by the Netvox LoRaWAN Application Command document and
