3
3. Main Features
Compatible with LoRaWAN
2 sections of 3V CR2450 button battery power supply
Detectable voltage and seat occupancy status
Simple operation and setting
Protection level IP30
Compatible with LoRaWAN Class A
Frequency hopping spread spectrum technology
Configuration parameters can be configured through third-party software platforms, data can be read and alarms can be set via
SMS text and email (optional)
Available third-party platform: Actility / ThingPark, TTN, MyDevices/Cayenne
Low power consumption and long battery life
4. Set up Instruction
On/Off
Power on
Insert batteries. (users may need a screwdriver to open);
Insert two sections of 3V CR2450 button batteries and close the battery cover.
Turn on
Press any function key till green and red indicator flashes once.
Turn off
(Restore to factory setting) Press and hold both function keys for 5 seconds till green indicator flashes for 20 times.
Power off
Remove Batteries.
Note:
1.Remove and insert the battery; the device memorizes previous on/off state by default.
2.On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor
inductance and other energy storage components.
3.Press any function key and insert batteries at the same time; it will enter engineer testing
mode.
