Netscape NETSCAPE CONSOLE 6.0 - MANAGING SERVERS, Руководство пользователя

Страница: 121 / 302

Access Settings
Chapter 7 Administration Server Configuration 121
4.
Enter network settings:
Port. Enter the port number you want this instance of Administration Server to
use. The port number can be any number between 1 and 65535 but, to avoid
conflicts with other resources, it is typically a number greater than 1024.
Connection Restrictions. Displays a list of hosts allowed to connect to this
instance of Administration Server. Use the drop-down list to specify whether
you’re adding to the list by DNS name or by IP address. The list is evaluated
first by host names, and then by IP addresses.
Add. Click if you want to display a dialog box for adding a host to the list of
computers allowed to connect to this instance of Administration Server.
Edit. Click if you want to display a dialog box for editing a Host IP address or
DNS name on the list of computers allowed to connect to this instance
Administration Server.
Remove. Click if you want to remove a selected entry from the list of allowed
hosts.
5.
Click OK.
Access Settings
You can use the Access Settings tab to specify a user name and password for the
Administration Server Administrator and to enable or disable Directory Server
Gateway access.
The Administration Server Administrator is a special user that has full access to all
features in the Administration Server. This user is created during installation for
the purpose of starting Netscape Console if a Directory Server is unavailable. The
Administration Server Administrator user name and password are stored in the
file
serverRoot
/admin-serv/config/admpw
.
The Directory Server Gateway is a service that provides web-based access to the
entire user directory. The Directory Server Gateway must be installed before you
can use this option. See the
Netscape Directory Server Administrator’s Guide for more
information.