manualshive.com logo in svg

Netopia 4752, Руководство администратора


Поделиться
Скачать
background image

F-6  Administration Guide

Protocols

■

ATM Protocols: ATM Multiprotocol Encapsulation over ATM Adaption Layer 5 (RFC 1483): Logical Link 
Control (LLC) encapsulation routed modes

■

Suppor t for up to 16 PVCs

■

PPP Over ATM, PPP over Ethernet: PAP, CHAP or no authentication (RFC 2364). Compression Control 
Protocol (RFC 1974)

■

Frame Relay Suppor ts: ANSI T1.617 and ANSI T1.618 Annex D LMI, Annex A and Cisco LMI, (RFC 1490) 
multiprotocol Interconnect over Frame Relay. FRF.12 Fragmentation, and FRF.16 IMUX

■

Compression: IP Control Protocol (RFC 1332), PPP Stac LZS Compression Protocol (RFC 1974), Ascend 
LZS Compression Protocol, Van Jacobson Header Compression

■

Vir tual Circuit: Terminates ATM Permanent Vir tual Circuit (PVC) with ATM Adaptation Layer 5 (AAL5); Allows 
manual configuration of Vir tual Path Identifier (VPI) and Vir tual Channel Identifier (VCI). Suppor ts Multiple 
PVCs, and multiple VCI/VPI suppor t.

■

Routing: Transmit and Receive RIPV1 and RIPV2 (RFC 2453) and RIPV1 compatibility mode, up to 32 static 
routes with default route and the option to not adver tise routes, configurable with up to 8 subnets on LAN 
with DHCP pool associated with each subnet

■

IP Addressing: Dynamic Host Configuration Protocol (DHCP) and BootP ser vers. Suppor ts up to 8 different 
pools of IP addresses (one per subnet) with a maximum of 512 addresses.

■

WAN IP Inter face: Numbered or Unnumbered Inter face

Quality of service

■

TOS Bit Type of Ser vice or application based queuing.

■

Frame Relay: FRF.12 suppor t

■

ATM: UBR suppor t

Management 

■

Auto SpeedSet (with some DSLAMs): Automatically hunts through available speed modes until successfully 
trains at the speed set by remote DSL concentrator

■

Management Security: Password-protected with up to 4 user names and passwords

■

LEDs: Diagnostic lights for at-a-glance management of Ethernet, WAN, and power connections

■

Firmware: Upgrade firmware in flash memor y via TFTP or X-Modem transfer using modem or direct cable 
connection; configuration retained with upgrades; batter y backup to protect configuration across power 
failures

■

Trivial File Transfer Protocol (TFTP) Client: Allows remote upload and download firmware and configuration 
files directly to the router

■

Integrated Management Utilities: ICMP Ping: Tests IP connectivity from router to local or remote site. Trace 
Route: Determines routing path to par ticular host name or IP address. Telnet Client: Provides remote 
management access to Telnet hosts on the LAN and WAN. Syslog Client: Maintains ongoing activity log on 

Содержание 4752





























































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 4752

Watchguard AP200 Setup Manual preview
AP200
Бренд: Watchguard Страницы: 40
GE MDS SD Series Setup Manual preview
MDS SD Series
Бренд: GE Страницы: 4
Patton electronics 1090 Service Manual preview
1090
Бренд: Patton electronics Страницы: 8
QTech QSR-3920 Series Configuration Manual preview
QSR-3920 Series
Бренд: QTech Страницы: 120
Profile LS901-E1 Instruction Manual preview
LS901-E1
Бренд: Profile Страницы: 6
Planet GSW-1602SF User Manual preview
GSW-1602SF
Бренд: Planet Страницы: 20
AT&T Nighthawk M6 Pro Let'S Get Started preview
Nighthawk M6 Pro
Бренд: AT&T Страницы: 2
NETGEAR DG834GT - 108 Mbps Super G Wireless ADSL Router Specifications preview
DG834GT - 108 Mbps Super G Wireless ADSL Router
Бренд: NETGEAR Страницы: 2
Seriallink SLK-R602 Series Manual preview
SLK-R602 Series
Бренд: Seriallink Страницы: 29
National Instruments SCXI-1120 User Manual preview
SCXI-1120
Бренд: National Instruments Страницы: 130
EVOC 6336-STG-YX Manual preview
6336-STG-YX
Бренд: EVOC Страницы: 57
B-G Instruments DataPlot CB1224 Manual preview
DataPlot CB1224
Бренд: B-G Instruments Страницы: 4
ANTAIRA LMP-1202M-SFP Series Quick Installation Manual preview
LMP-1202M-SFP Series
Бренд: ANTAIRA Страницы: 2
Cypress PSoC 4 S Series Quick Start Manual preview
PSoC 4 S Series
Бренд: Cypress Страницы: 4
Pakedge Device & Software RK-1 Quick Start Manual preview
RK-1
Бренд: Pakedge Device & Software Страницы: 14
Waver WAC52N Quick Start Manual preview
WAC52N
Бренд: Waver Страницы: 36
AirLive Ether-GSH24T v3 Quick Setup Manual preview
Ether-GSH24T v3
Бренд: AirLive Страницы: 2
Idis DR-8364F Quick Manual preview
DR-8364F
Бренд: Idis Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды