manualshive.com logo in svg

Netopia 4752, Руководство администратора


Поделиться
Скачать
background image

Easy Setup   7-11

5.

Type the Primar y Domain Name Ser ver address your ISP gave you. Press Return. A new field 

Secondary 

Domain Name Server

 will appear. If your ISP gave you a secondar y domain name ser ver address, enter it 

here. Press Return until the next field 

Default IP Gateway

 is highlighted.

6.

If you do not enter a 

Default IP Gateway

 value, the router defaults to the remote IP address you entered in 

the Easy Setup connection profile. If the device does not recognize the destination of any IP traffic, it 
for wards that traffic to this gateway. 

Do not confuse the remote IP address and the Default IP Gateway’s address with the block of local IP 
addresses you receive from your ISP. You use the local IP addresses for the Netopia 4752’s Ethernet por t 
and for IP clients on your local network. The remote IP address and the default gateway’s IP address 
should point to your ISP’s router.

7.

Toggle 

IP Address Serving

 to On or Off, depending on whether you want the device’s IP address ser ver to 

supply dynamic IP addresses to your client workstations. Normally, you would accept the default On so that 
workstations on your LAN can use a single IP address assigned by your ISP to connect to the Internet.

8.

The IP address ser ver will provide 100 IP addresses automatically to workstations on your LAN. You only 
need to change the 

Number of Client IP Addresses

 if you have some other IP addressing scheme.

9.

By default, the 

1st Client Address

 is 192.168.1.100, based on the device’s default IP address of 

192.168.1.1. You only need to change this if you have some other IP addressing scheme.

10. Press the Down arrow key until you reach 

NEXT SCREEN

. Press Return.

Easy Setup Security Configuration

The Easy Setup Security Configuration screen lets you password-protect your Netopia 4752. Input your 

Write 

Access Name

 and 

Write Access Password

 with names or numbers totaling up to eleven digits.

If you password protect the console screens, you will be prompted to enter the name and password you have 
specified ever y time you log in to the console screens. Do not forget your name and password. If you do, you 
will be unable to access any of the configuration screens.

Additional security features are available. See 

“Security” on page 13-1

.

Содержание 4752





























































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 4752

D-Link Air DCS-1000W Setting-Up Manual preview
Air DCS-1000W
Бренд: D-Link Страницы: 13
VCS VideoJet 100 Manual preview
VideoJet 100
Бренд: VCS Страницы: 118
3Com 3C13640 Installation Manual preview
3C13640
Бренд: 3Com Страницы: 32
QNAP Turbo NAS TVS-71 Series Hardware User Manual preview
Turbo NAS TVS-71 Series
Бренд: QNAP Страницы: 51
Alcatel-Lucent 9364 Installation And Commissioning Manual preview
9364
Бренд: Alcatel-Lucent Страницы: 60
Planet FGSW-2620 User Manual preview
FGSW-2620
Бренд: Planet Страницы: 13
RouterBOARD OmniTik UPA-5HnD Quick Setup Manual And Warranty Information preview
OmniTik UPA-5HnD
Бренд: RouterBOARD Страницы: 4
Datalogic C-BOX 100 Instruction Manual preview
C-BOX 100
Бренд: Datalogic Страницы: 2
M-Audio FireWire 1814 Manual Del Usuario preview
FireWire 1814
Бренд: M-Audio Страницы: 67
Helmholz REX 100 3G Quick Start Manual preview
REX 100 3G
Бренд: Helmholz Страницы: 20
Tripp Lite N201-025-OR Specification Sheet preview
N201-025-OR
Бренд: Tripp Lite Страницы: 2
Toto Link n500rdg User Manual preview
n500rdg
Бренд: Toto Link Страницы: 38
Junxion Junxion Box JB-110b User Manual preview
Junxion Box JB-110b
Бренд: Junxion Страницы: 48
KE2 Therm Solutions KE2-EM35 Overview, Installation, And Setup Instructions preview
KE2-EM35
Бренд: KE2 Therm Solutions Страницы: 26
AVYCON AVR-HN516P16A Quick Start Manual preview
AVR-HN516P16A
Бренд: AVYCON Страницы: 2
Panasonic PN28160A Operation Manual preview
PN28160A
Бренд: Panasonic Страницы: 277
Panasonic PN28480K-ID Operation Manual preview
PN28480K-ID
Бренд: Panasonic Страницы: 438
Philips SNB6500 Quick Start Manual preview
SNB6500
Бренд: Philips Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды