NETGEAR WPN824v3 - RangeMax Wireless Router, Руководство пользователя

Страница: 70 / 104

RangeMax Wireless Router WPN824v3 User Manual
5-14 Advanced Settings and Features
v1.0, January 2008
3. Click Add or Edit. The following screen displays:
Figure 5-8
4. Enter the settings for the static route.
• Route Name . This is for identification purposes only.
• Private . If you want to limit access to the LAN only, then select this check box. The static
route will not be reported in RIP.
• Active . You must select this check box to make this route effective.
• Destination IP Address . The IP address of the final destination.
• IP Subnet Mask . If the destination is a single host, type 255.255.255.255 .
• Gateway IP Address . This must be a router on the same LAN segment as your wireless
router.
• Metric . Type a number between 2 and 15. This represents the number of routers between
your network and the destination. Usually, a setting of 2 or 3 works, but if this is a direct
connection, set it to 2.
5. Click Apply . The static route is added to the Static Routes table.