background image

 

Americas Headquarters:

© 2011 Cisco Systems, Inc. All rights reserved.

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco Configuration Professional 
Quick Start Guide

April 29, 2011

This document explains how to start using Cisco Configuration Professional Express 
(Cisco CP Express) and Cisco Configuration Professional (Cisco CP). 

Cisco Configuration Professional (Cisco CP) is a GUI based device management tool for Cisco access 
routers. This tool simplifies routing, firewall, IPS, VPN, unified communications, WAN and LAN 
configuration through GUI based easy-to-use wizards.

Cisco CP is a valuable productivity enhancing tool for network administrators and channel partners for 
deploying routers with increased confidence and ease. It offers a one-click router lockdown and an 
innovative voice and security auditing capability to check and recommend changes to router 
configuration. Cisco CP also monitors router status and troubleshoots WAN and VPN connectivity 
issues. 

Cisco CP Express is a light weight version of Cisco CP. You can use Cisco CP Express to configure basic 
security features on the router’s LAN and WAN interfaces. Cisco CP Express is available on the router 
Flash memory.

This document shows you how to set up a PC to connect to the router, give the router an initial network 
configuration using Cisco CP Express, and then begin using Cisco CP. 

This document is intended for users with one of the ordering options (SKU) listed in 

Table 1

, and for 

users who download these configuration tools from Cisco.com. Refer to the 

Release Notes for 

Cisco Configuration Professional

 for information about supported routers, web browsers, and plug-ins.

Cisco CP ordering options are provided to suit a variety of deployments. 

Table 1

 describes the Cisco CP 

ordering options, the deployment each supports, and how this document can be used.

Содержание 861W - Integrated Services Router Wireless



































Отзывы: