17
Cisco Configuration Professional Quick Start Guide
78-18480-08
Task 5: Run the Cisco CP Express Wizard
Step 4
The Cisco CP Express Overview page appears and then the Cisco CP Express Wizard page is also
displayed (
Figure 5
). Click
Next
to begin configuring the router.
Figure 5
Cisco CP Express Overview and Wizard Pages
Tip
The Cisco CP Express wizard will ask you to enter an enable secret password to control access to
Cisco IOS software. Be sure to write down or remember the enable secret password that you enter. It is
not shown in the Enable Password field or in the Summary window, and it cannot be reset without erasing
the router configuration. You are also asked to change the router’s LAN IP address from its default value.
Step 5
When the Summary window appears, write down the LAN IP address, the username and the user
password that you entered, and click
Finish
. You will need this information to reconnect to the router to
perform additional configuration.
Step 6
Exit Cisco CP Express and complete
“Task 6: Verify the Initial Configuration”
to reconfigure the PC and
reconnect to your router, using the new IP address that you gave to the LAN interface.
