Appendix A. Factory Settings and Technical Specifications
|
20
A
A.
Factory Settings and Technical
Specifications
Factory Settings
You can use the Reset button on the rear panel to return your adapter to its factory settings.
Reset
button
Figure 6. The Reset button restores factory settings
Use a pin or paperclip to press the Reset button and hold it for 5 seconds until the power
LED blinks amber.
Table 4.
Factory Settings
Smart Wizard
Enabled
Wireless
Wireless communication
Disabled
Wireless Network Name (SSID)
Any (will connect to the first wireless network that responds)
Security
Disabled
Transmission speed
Auto
1
1 Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate
Country/Region
United States (varies by region)
Operating mode
802.11n, 802.11g, 802.11b
Data rate
Up to 300 Mbps
