manualshive.com logo in svg

NETGEAR WG302 - 802.11g ProSafe Wireless Access Point, Справочное руководство, Страница: 47 / 128

Поделиться
Скачать
NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Скачать руководство пользователя страница 47

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

Basic Installation and Configuration

3-25

July 2005 v3.0

6.

Choose 

WPA with Radius 

from the list. 

7.

Click 

Apply

 to save your settings.

How to Configure WPA-PSK

Note

: Not all wireless adapters support WPA. Furthermore, client software is required on the 

client. Windows XP and Windows 2000 with Service Pack 3 do include the client software that 
supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA. 
Consult the product document for your wireless adapter and WPA client software for instructions 
on configuring WPA settings.

To configure WPA-PSK, follow these steps:

1.

Log in at the default LAN address of 

http://192.168.0.228

 with the default user name of 

admin

 and default password of 

password

, or using whatever LAN address and password you 

have set up.

2.

Click 

WEP/WPA Settings

 in the Security menu of the WG302. 

Figure 3-14:  WEP/WPA Settings menu

3.

Choose 

WPA-PSK 

from the list. 

4.

Enter the pre-shared key passphrase.

5.

Click 

Apply

 to save your settings.

Содержание WG302 - 802.11g ProSafe Wireless Access Point

































































































































Отзывы:

Нет отзывов