manualshive.com logo in svg

NETGEAR WG302 - 802.11g ProSafe Wireless Access Point, Справочное руководство, Страница: 2 / 128

Поделиться
Скачать
NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Скачать руководство пользователя страница 2

ii

July 2005 v3.0

Technical Support

Please register to obtain technical support

. Please retain your proof of purchase and warranty 

information.

To register your product, get product support or obtain product information and product 
documentation, go to http://www.NETGEAR.com. If you do not have access to the World Wide 
Web, you may register your product by filling out the registration card and mailing it to 
NETGEAR customer service.

You will find technical support information at: 

 

http://www.NETGEAR.com/ through the customer service area. If you want to contact technical 
support by telephone, see the support information card for the correct telephone number for your 
country.

© 2005 by NETGEAR, Inc. All rights reserved. 

Trademarks

NETGEAR is a registered trademark of NETGEAR, INC. Windows is a registered trademark of Microsoft 
Corporation. Other brand and product names are trademarks or registered trademarks of their respective 
holders. Information is subject to change without notice. All rights reserved.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the 
right to make changes to the products described in this document without notice. NETGEAR does not 
assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) 
described herein.

Modifications made to the product, unless expressly approved by Netgear, could void the user’s authority to 
operate the equipment. NETGEAR does not assume any liability that may occur due to such condition.

Содержание WG302 - 802.11g ProSafe Wireless Access Point

































































































































Отзывы:

Нет отзывов