6.
Click the Add Service button.
7.
Specify a new port triggering rule with a custom service or application as described in the following
table.
Description
Field
Service
Enter the name of the custom service or application.
Service Name
From the Service User menu, select Any, or select Single address and enter the IP
address of one computer:
•
Any. This is the default setting and allows any computer on the Internet to use
this service.
•
Single address. Restricts the service to a particular computer. Enter the IP address
in the field that becomes available with this selection from the menu.
Service User
Select the protocol (TCP or UDP) that is associated with the service or application.
Service Type
Enter the number of the outbound traffic port that must open the inbound ports.
Triggering Port
Inbound Connection
Select the protocol (TCP or UDP) that is associated with the inbound connection.
If you are unsure, select TCP/UDP.
Connection Type
Enter the start port number for the inbound connection.
Starting Port
Enter the end port number for the inbound connection.
Ending Port
8.
Click the Apply button.
Your settings are saved and the rule is added to the Port Triggering Portmap Table on the Port Forwarding
/ Port Triggering page.
Manage Port Forwarding and Port Triggering
196
Nighthawk AC1900 Smart WiFi Router Model R6900P
