manualshive.com logo in svg

NETGEAR Nighthawk R7100LG, Руководство пользователя, Страница: 69 / 179

Поделиться
Скачать
NETGEAR Nighthawk R7100LG Скачать руководство пользователя страница 69

If you connected wirelessly to the network and you changed the SSID, you are disconnected from the
network.

10.

Make sure that you can connect wirelessly to the network with its new settings.

If you cannot connect wirelessly, check the following:

•

Is your computer or mobile device connected to another WiFi network in your area? Some WiFi
devices automatically connect to the first open network without WiFi security that they discover.

•

Is your computer or mobile device trying to connect to your network with its old settings (before you
changed the settings)? If so, update the WiFi network selection in your computer or mobile device
to match the current settings for your network.

Change the WiFi Mbps Settings

The data rate for high-speed transmissions is commonly identified as megabits per second (Mbps). By
default, the router is set to operate with up to 600 Mbps in the 2.4 GHz WiFi band and up to 1,733 Mbps in
the 5 GHz WiFi band. You can select slower settings.

To change the WiFi Mbps settings:

1.

Launch a web browser from a computer or mobile device that is connected to the network.

2.

Type http://www.routerlogin.net.

A login window opens.

3.

Enter the modem router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Network Settings

69

Nighthawk AC1900 WiFi LTE Modem Router

Содержание Nighthawk R7100LG




















































































































































































Отзывы:

Нет отзывов