NETGEAR Nighthawk R7100LG Скачать руководство пользователя страница 12

Страница: 12 / 179

Figure 3. Rear panel

Viewed from left to right, the back panel contains the following components:

•

LED On/Off button. If this button is pressed, all the modem router's LEDs are turned off except the
Power LED.

•

SIM slot. Insert a micro-SIM card into this slot.

•

Reset button. Pressing the Reset button returns the modem router to its factory settings. For information
about the factory settings, see

Factory Settings

on page 176.

•

Ethernet ports. ports. Four Gigabit Ethernet RJ-45 LAN ports to connect the modem router to LAN
devices.

•

Internet port. One Gigabit Ethernet RJ-45 WAN port to connect the modem router to a cable modem.

•

USB port. One USB 2.0 port to connect a storage device.

•

Power On/Off button. Press the Power On/Off button to provide power to the modem router.

•

DC power connector. Connect the power adapter that came in the product package to the DC power
connector.

Hardware Setup

Nighthawk AC1900 WiFi LTE Modem Router

Содержание Nighthawk R7100LG




















































































































































































Результаты поиска

Содержание Nighthawk R7100LG

Отзывы:

NETGEAR Nighthawk R7100LG, Руководство пользователя, Страница: 12 / 179

Результаты поиска

Содержание Nighthawk R7100LG

Отзывы: