NETGEAR Nighthawk R7100LG Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 179

NETGEAR Nighthawk R7100LG Скачать руководство пользователя страница 46

3.

Enter the modem router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

4.

Select ADVANCED > Setup > WAN Setup.

5.

In the MTU Size field, enter a value from 64 to 1500.

6.

Click the Apply button.

Your settings are saved.

If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are willing to experiment,
you can gradually reduce the MTU from the maximum value of 1500 until the problem goes away. The following
table describes common MTU sizes and applications.

Table 2. Common MTU sizes

Application

MTU

The largest Ethernet packet size. This setting is typical for connections that do not use
PPPoE or VPN and is the default value for NETGEAR modem routers, adapters, and
switches.

1500

Used in PPPoE environments.

1492

Maximum size to use for pinging. (Larger packets are fragmented.)

1472

Used in some DHCP environments.

1468

Usable by AOL if you do not send or receive large email attachments, for example.

1460

Used in PPTP environments or with VPN.

1436

Maximum size for AOL DSL.

1400

Typical value to connect to dial-up ISPs.

576

Specify Your Internet Settings

46

Nighthawk AC1900 WiFi LTE Modem Router

«
...
44
45
46
47
48
...
»

Содержание Nighthawk R7100LG




















































































































































































Отзывы:

Нет отзывов