NETGEAR Nighthawk R7100LG Скачать руководство пользователя страница 10

Страница: 10 / 179

Table 1. LED descriptions

Description

LED

•

Solid amber. The modem router is starting.

•

Blinking amber. The firmware is upgrading, or the Reset button was pressed.

•

Solid white. The modem router is ready.

•

Blinking white. The firmware is corrupted.

•

Off. Power is not supplied to the modem router.

Power

•

Solid white. The Internet connection is ready.

•

Solid amber. The modem router detected an Ethernet cable connection to the modem.

•

Blinking white. The port is sending or receiving traffic.

•

Off. No Ethernet cable is connected between the modem router and the modem.

Internet

The following is the LED behavior if the modem router is connected to a 4G network:

•

Solid blue. Signal strength is good or fair.

•

Solid green. Signal strength is weak.

•

Blinking blue or green. Data activity is occurring.

The following is the LED behavior if the modem router is connected to a 3G network:

•

Solid amber. Signal strength is good or fair.

•

Solid red. Signal strength is weak.

•

Blinking amber or red. Data activity is occurring.

3G/4G

•

Solid white. The 2.4 GHz WiFi radio is operating.

•

Blinking. The modem router is sending or receiving WiFi traffic.

•

Off. The 2.4 GHz WiFi radio is off.

2.4 GHz WiFi

•

Solid white. The 5 GHz WiFi radio is operating.

•

Blinking. The modem router is sending or receiving WiFi traffic.

•

Off. The 5 GHz WiFi radio is off.

5 GHz WiFi

Hardware Setup

Nighthawk AC1900 WiFi LTE Modem Router

Содержание Nighthawk R7100LG




















































































































































































Результаты поиска

Содержание Nighthawk R7100LG

Отзывы:

NETGEAR Nighthawk R7100LG, Руководство пользователя, Страница: 10 / 179

Результаты поиска

Содержание Nighthawk R7100LG

Отзывы: