NETGEAR N450 WNR2500 Скачать руководство пользователя страница 92

Страница: 92 / 143

Advanced Settings

N450 Wireless Router WNR2500

A screen similar to the following displays:

In the Service Name field, enter a descriptive name.

In the Protocol list, select the protocol. Select

TCP

UDP

, or

TCP/UDP

If you are not sure, select

TCP/UDP

In the External Starting Port field, enter the beginning port number.

•

If the application uses a single port, enter the same port number in the External
Ending Port field.

•

If the application uses a range of ports, enter the ending port number of the range in
the External Ending Port field.

If the internal port numbers are the same as the external port numbers, select the

Use the

same port range for Internal port

check box.

If they are not, use the Internal Starting Port and Internal Ending Port fields to enter the
port numbers.

In the Internal IP Address field, enter the IP address of your local computer that provides this
service.

You can also select a radio button for one of the devices in the list of attached devices to
automatically place the IP address of the selected device in the Internal IP Address field.

Click the

Apply

button.

The service is added to the table on the Port Forwarding / Port Triggering screen.

Содержание N450 WNR2500
















































































































































Результаты поиска

Содержание N450 WNR2500

Отзывы:

NETGEAR N450 WNR2500, Руководство пользователя, Страница: 92 / 143

Результаты поиска

Содержание N450 WNR2500

Отзывы: