manualshive.com logo in svg

NETGEAR N450 WNR2500, Руководство пользователя, Страница: 29 / 143

Поделиться
Скачать
NETGEAR N450 WNR2500 Скачать руководство пользователя страница 29

genie BASIC Settings

29

 N450 Wireless Router WNR2500

A screen similar to the following displays:

Note:

 

The screen sections, settings, and procedures are explained in the 

following sections.

2.

Make your changes.

3.

Click the 

Apply

 button.

4.

Set up and test your wireless devices and computers to make sure that they can connect 
wirelessly. If they do not, check the following:

•

Is your wireless device or computer connected to your network or another wireless 
network in your area? Some wireless devices automatically connect to the first open 
network (without wireless security) that they discover.

•

Does your wireless device or computer display on the Attached Devices screen? If it 
does, then it is connected to the network.

•

If you are not sure what the network name (SSID) or password is, look on the label on 
your router.

Note:

The WEP option displays only if you select Up to 54 Mbps from the 
Mode list.

Wireless Settings Screen Fields

The following sections describe the fields of the Wireless Settings screen.

Содержание N450 WNR2500
















































































































































Отзывы:

Нет отзывов