NETGEAR LBR20 Скачать руководство пользователя страница 99

Страница: 99 / 160

The table displays the following information:

•

Connection Type. The connection type, such as DHCP.

•

Received Signal Quality (in dbm). The quality of the received radio signal.

•

Network mode. The broadband network mode, such as LTE.

•

Band. The LTE frequency operating band.

•

LAC. The location area code of the cellular network.

•

Cell ID. The ID of the network cell, that is, the cellular tower, to which the router
is connected.

•

SIM Status. Shows whether the SIM card is inserted in the router, and if so,
whether the SIM card is ready for operation.

•

IMEI. The International Mobile Station Equipment Identity (IMEI), used to identify
the device (that is, the router) on the network

•

IMSI. The International Mobile Subscriber Identity (IMSI), used to identify the
subscriber account (that is, the SIM card) on the network.

•

System Up Time. The time elapsed since the router was last restarted.

•

Roaming State. Shows whether the router is in its home area or is roaming.

•

Connection Status. Shows whether the router is connected.

•

IP Address. The IP address that is assigned by the LTE provider.

•

Operator. The LTE provider.

•

DNS Server. The IP address of the LTE provider’s Domain Name Service server
that provides translation of network names to IP addresses.

•

RSRP. The Reference Signals Received Power.

•

RSRQ. The Reference Signal Received Quality.

•

Signal Strength. An icon that displays the strength of the signal. One bar is a
weak signal. Five bars is a very strong signal.

•

Network Type. The LTE network type.

•

E/U/ARFCN. The E-UTRA Absolute Radio Frequency Channel Number.

•

Band Name. By default, the band name is BRS/EBS.

•

Uplink Frequency (phone to base station). The uplink frequency band in the
LTE band.

•

Downlink Frequency (base station to phone). The downlink frequency band
in the LTE band.

•

Band Number. The LTE band number.

User Manual

Manage Your Network

4G LTE WiFi Orbi Router Model LBR20

Содержание LBR20

































































































































































Результаты поиска

Содержание LBR20

Отзывы:

Похожие инструкции для LBR20

Бренды по названию

Популярные бренды

NETGEAR LBR20, Руководство пользователя

Результаты поиска

Содержание LBR20

Отзывы:

Похожие инструкции для LBR20

Бренды по названию

Популярные бренды