Connect to the Orbi network
You can connect to the Orbi network through a WiFi or wired connection.
In the unlikely situation that you set up your computer to use a static IP address, change
the settings so that it uses Dynamic Host Configuration Protocol (DHCP).
WiFi network
If you’re installing your Orbi router for the first time, you can connect to the router’s WiFi
network by scanning the QR code on your router with the camera app on your mobile
device. To scan the QR code with your camera app, your mobile device must have iOS
version 11 or later or Android version 10 or later.
You can also manually find and select the Orbi router’s WiFi network from your
WiFi-enabled computer or mobile device.
To find, select, and join the WiFi Orbi WiFi network:
1. Make sure that the router is receiving power (its Power LED is lit).
2. On your WiFi-enabled computer or mobile device, find and select the WiFi network.
The WiFi network name is on the router label.
Note: If you bought a satellite, the default WiFi network name for the satellite is
different from the default WiFi network name for the router.
3. Join the WiFi network and enter the WiFi password.
The password is on the router label.
Your WiFi-enabled computer or mobile device connects to the WiFi network.
Wired connection
You can connect your computer to the router using an Ethernet cable and join the
router’s local area network (LAN). The computer must have an Ethernet port.
To connect your computer to the router with an Ethernet cable:
1. Make sure that the router is receiving power (its Power LED is lit).
2. Connect an Ethernet cable to an Ethernet port on your computer.
3. Connect the other end of the Ethernet cable to one of the router’s Ethernet ports.
Your computer connects to the local area network (LAN). A message might display
on your computer screen to notify you that an Ethernet cable is connected.
User Manual
14
Connect to Your Network and
Access the Router
4G LTE WiFi Orbi Router Model LBR20
