Security Bar
14
Home Security Touchscreen HSS101
Security Bar Buttons
Going left to right, the Security bar has an Emergency button, a System icon, and an
ARM/DISARM button. These features are introduced here and described below.
System icon
Emergency button
ARM/DISARM button
Figure 8. Security bar along the bottom of the screen
•
Emergency button
. Touch this button to display your configured panic buttons.
•
System icon
. Touch this icon to display the overall status of your security system,
including sensor information.
•
ARM/DISARM button
. Touch this button to display the options for changing the arm state
of your security system. See
ARM and DISARM Buttons
on page
18 for details.
Emergency Button
The Emergency button lets you send an alarm directly to the central
monitoring station to indicate a fire, police, or personal emergency. The Fire
button sends an immediate alarm without any delay. The Police and
Personal buttons provide a very brief delay so you can cancel the alarms before they are
sent, if necessary.
Touch the
Emergency
button in the Security bar on the Home screen to display the individual
emergency buttons. Touch and hold the appropriate button for 2 seconds to send an alarm.
These buttons are the same as the panic buttons configured on the Security panel and
described in
Security Panel
on page
40
.
Be aware that if no panic buttons are configured on
the Security panel, the Emergency button does not display in the Security bar.
Note:
Depending on how your Security Panel keypad panic buttons are
configured, the screen might look different from the screen shown here.
Figure 9. Fire, Police, and Personal emergency buttons
