manualshive.com logo in svg

NETGEAR GSM7352S - ProSafe Switch - Stackable, Руководство пользователя

Поделиться
Скачать
NETGEAR GSM7352S - ProSafe Switch - Stackable Скачать руководство пользователя страница 503

  Chapter 6.  Managing Device Security

 

   

|

     

503

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual 

IP Source Guard

The IP Source Guard folder contains links to the following features:

•     IP Source Guard Interface Configuration 

on page

 

503

•     IP Source Guard Binding Configuration 

on page

 

504

IP Source Guard Interface Configuration

To display the IP Source Guard Interface Configuration page, click 

Security 

 Control> IP 

Source Guard 

 Interface Configuration.

1. 

Interface

 - Selects the interface to enable IPSG.

2. 

Use 

IPSG Mode

 to enable or disable validation of Sender IP Address on this interface. If 

IPSG is Enabled Packets will not be forwarded if Sender IP Address is not in DHCP 
Snooping Binding database. The factory default is disabled.

3. 

Use 

IPSG Port Security

 to enable or disables the IPSG Port Security on the selected 

interface. If IPSG Port Security is enabled then the packets will not be forwarded if the 
sender MAC Address is not in FDB table and it is not in DHCP snooping binding database. 
To enforce filtering based on MAC address other required configurations are:

•     

Enable port-security Globally.

•     

Enable port-security on the interface level.

IPSG Port Security can't be Enabled if IPSG is Disabled. The factory default is disabled.

Содержание GSM7352S - ProSafe Switch - Stackable





















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды