Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal-
Introduction
2-5
v1.0, February 2007
The table below describes the GSM7352S LEDs on the front of the switch.
Table 2-2. GSM7352S LED Description
LED
Description
ID
This is the stack member ID (1–8) that the software assigns to the
switch.
Master
•
Green:
The switch is a master unit in a stack of GSM7300S series
switches.
•
Off
: The switch acts as a slave unit in a stack of GSM7300S
switches.
RPS
(redundant power
supply)
•
Solid green:
The redundant power supply is connected (and using
internal power).
•
Solid yellow:
The switch internal power has failed or been
disconnected, but the redundant power supply is providing power
to the switch.
•
Blinking yellow
: The redundant power supply unit is present but
the power has failed.
•
Off:
The redundant power supply is disconnected or not present.
Fan
•
Red
: Fan has failed
•
Off:
Fan operating normally
PWR (Power)
•
Solid green:
Power is supplied and the switch is working.
•
Solid yellow
: Power on Self Test (POST) in progress.
•
Blinking yellow
: POST , CPU , or internal power supply has failed.
•
Off:
Power is disconnected.
10/100/1000M
Ports
Link/ACT LED
•
Off
: No link is established on the port.
•
Solid green:
A valid link is established on the port.
•
Blinking green:
The port is sending or receiving packets.
SPD LED
•
Off:
No link or a valid 10M link is established on the port.
•
Solid yellow:
A valid 100 Mbps link is established on the port.
•
Solid green:
A valid 1000 Mbps link is established on the port.
Note:
If port 41~48 media changes to SFP, the RJ-45 LEDs change
to OFF status
Содержание GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch
Страница 43: ......
Страница 44: ...NETGEAR Inc 4500 Great America Parkway Santa Clara CA 95054 USA February 2007...
