background image

Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal-

2-10

Introduction

v1.0, February 2007

Safety Instructions

Use the following safety guidelines to ensure your own personal safety and to help 
protect your system from potential damage. 

To reduce the risk of bodily injury, electrical shock, fire, and damage to the 
equipment, observe the following precautions.

Observe and follow service markings.

Do not service any product except as explained in your system 
documentation.

Opening or removing covers that are marked with the triangular symbol 
with a lightning bolt may expose you to electrical shock. Only a trained 
service technician should service components inside these compartments.

If any of the following conditions occur, unplug the product from the 
electrical outlet and replace the part or contact your trained service provider:

The power cable, extension cable, or plug is damaged.

An object has fallen into the product.

The product has been exposed to water.

The product has been dropped or damaged.

The product does not operate correctly when you follow the operating 
instructions.

Keep your system away from radiators and heat sources. Also, do not block 
cooling vents.

Do not spill food or liquids on your system components, and never operate the 
product in a wet environment. If the system gets wet, see the appropriate 
section in your troubleshooting guide or contact your trained service provider.

Do not push any objects into the openings of your system. Doing so can cause 
fire or electric shock by shorting out interior components.

Use the product only with approved equipment.

Allow the product to cool before removing covers or touching internal 
components.

Operate the product only from the type of external power source indicated on 
the electrical ratings label. If you are not sure of the type of power source 
required, consult your service provider or local power company.

Содержание GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch













































Отзывы: