NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch, Руководство по установке

Страница: 12 / 44

Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal-
2-2 Introduction
v1.0, February 2007
The following table describes the LEDs on the front panel of the switch.
Figure 2-1
Table 2-1. LED Descriptions for GSM7328S
LED Description
ID This is the stack member ID (1–8) that the software assigns to the
switch.
Master • Green: Switch acts as a master unit in a stack of GSM7300S
series switches.
• Off: Switch acts as a slave unit in a stack of GSM7300S switches.
RPS
(redundant power
supply)
• Solid green: The redundant power supply is connected (and using
internal power).
• Solid yellow: The switch internal power has failed or been
disconnected, but the redundant power supply is providing power
to the switch.
• Blinking yellow : The redundant power supply unit is present, but
the power has failed.
• Off: The redundant power supply is disconnected or not present.
Fan • Red: Fan has failed.
• Off: Fan operating normally.
PWR (power) • Solid green: Power is supplied and the switch is working.
• Solid yellow : Power-on Self-Test (POST) is in progress.
• Blinking yellow: POST, CPU, or internal power supply has failed.
• Off: Power is disconnected.
Stacking/XFP Copper/fiber
RJ-45 jacks
LEDs RST
(reset button)
module bays combo ports
1