NETGEAR GS700TS Series, Руководство пользователя

Страница: 39 / 189

GS700TS Series Smart Switch Software User Manual
5-10 Configuring The Device Using Your Browser
v1.0, November 2006
• System Up Time – Displays the amount of time since the most recent device reset. The
system time is displayed in the following format: Days, Hours, Minutes, and Seconds. For
example, 41 days, 2 hours, 22 minutes and 15 seconds.
• Idle Timeout (Min) – Indicates the amount of time (minutes) that elapses before an idle
station is timed out. Idle stations that are timed out must login to the system. The field
range is 5 - 30 minutes. The field default value is 10 minutes.
• Base MAC Address – Displays the MAC address for each stacking unit.
• Serial Number – Displays the device serial number.
• Unit Mode – Indicates if the device is currently in stand-alone or stacking mode. By
default, the device runs in stacking mode.
• Jumbo Frame Support – Enables Jumbo Frames on the device. Jumbo Frames enable the
transportation of identical data in fewer frames. This ensures less overhead, lower
processing time, and fewer interruptions. The possible field values are:
– Enable – Switch will recognize and forward Jumbo Frames.
– Disable – Switch will not recognize Jumbo Frames.
The Switch Status Page Versions section contains the following fields:
• Unit No . – Indicates the stacking member’s current number. Possible values are 1-6.
• Model Name – Displays the device model number and name.
• Hardware Version – Displays the installed device hardware version number.
• Boot Version – Displays the current boot version running on the device.
• Software Version – Displays the installed software version number.
To make changes to the Device Information:
1. Define the relevant fields.
2. Click .