NETGEAR GS700TS Series, Руководство пользователя

Страница: 111 / 189

GS700TS Series Smart Switch Software User Manual
5-82 Configuring The Device Using Your Browser
v1.0, November 2006
• Port State – Displays the current STP state of a port. If enabled, the port state determines
what forwarding action is taken on traffic. Possible port states are:
– Forwarding – Indicates that STP is enabled on the port, and the port is forwarding
packets based on the STP topology.
– Disabled – Indicates that STP is currently disabled on the port. The port forwards
traffic while learning MAC addresses.
– Blocking – Indicates that the port is currently blocked and cannot forward traffic or
learn MAC addresses. Blocking is displayed when STP is enabled.
• Speed – Indicates the speed at which the port is operating.
• Path Cost – Specifies the method used to assign default path cost to STP ports. The
possible field values are:
– Short – Specifies 1 through 65,535 range for port path cost. This is the default value.
– Long – Specifies 1 through 200,000,000 range for port path cost. The default path cost
assigned to an interface varies according to the selected method (Hello Time, Max
Age, or Forward Delay).
• Priority (0-65535) – Specifies the bridge priority value. When switches or bridges are
running STP, each is assigned a priority. After exchanging BPDUs, the device with the
lowest priority value becomes the Root Bridge. The default value is 32768. The port
priority value is provided in increments of 4096.
2. Define the relevant fields.
3. Click . STP is enabled and the device is updated.
Defining STP on Interfaces
Network administrators can assign STP settings to specific interfaces using the Modify Spanning
Tree Page . The Global LAGs section displays the STP information for Link Aggregated Groups.