NETGEAR GS700TS Series, Руководство пользователя

Страница: 162 / 189

GS700TS Series Smart Switch Software User Manual
Configuring The Device Using Your Browser 5-133
v1.0, November 2006
To test cables:
1. Click Monitor > Copper Cable. The Copper Cable Page opens:
The Copper Cable Page contains the following fields:
• Unit No. – Indicates the stacking member for which the copper cable test results are
displayed.
• Interface – Specifies the port to which the cable is connected.
• Test Result – Displays the cable test results. Possible values are:
– No Cable – Indicates that a cable is not connected to the port.
– Open Cable – Indicates that a cable is connected on only one side.
– Short Cable – Indicates that a short has occurred in the cable.
– OK – Indicates that the cable passed the test.
• Cable Fault Distance – Indicates the distance from the port where the cable error
occurred.
Figure 5-97