Web Management
Figure 2 - 3: Web Management Front page after click “web access” on the Smart Wizard Discovery Utility
Network without DHCP server
1.
Connect FS700TS-series switch to your existing network.
2.
Power on FS700TS-series switch by plugging in power cord (Default IP is 192.168.0.239).
3.
Install the Smart Wizard Discovery Utility program on your computer
4.
Start the Smart Wizard Discovery utility. (Section 4 has detailed instructions on the Smart Wizard Discovery Utility)
5. Click
Discover
for the Smart Wizard Discovery Utility to find your FS700TS-series switch. You should see a something similar to Figure
2-1.
6. Click
on
Configuration Setting
(See Figure 2-4).
Note:
You can always assign a Static IP address to your FS700TS-series switch, even if your network does not have a DHCP server.
Page 6
