Performing Optical Transceiver Tests
The
Optical Transceivers Page
allows
network managers to perform tests on Fiber Optic cables. Optical transceiver diagnostics can be performed
only when the link is present. To test cables:
1. Click
Monitor > Optical Transceivers
. The
Optical Transceivers Page
opens:
Figure 5 - 70: Optical Transceivers Page
The
Optical Transceivers Page
contains the fields:
•
Unit No
. — Indicates the stacking member for which the fiber optic cable tests are displayed.
•
Port
— Displays the port IP address on which the cable is tested.
•
Temperature
— Displays the temperature (C) at which the cable is operating.
•
Voltage
— Displays the voltage at which the cable is operating.
•
Current
— Displays the current at which the cable is operating.
•
Output Power
— Indicates the rate at which the output power is transmitted.
•
Input Power
— Indicates the rate at which the input power is transmitted.
•
Transmitter Fault
— Indicates if a fault occurred during transmission.
•
Loss of Signal
— Indicates if a signal loss occurred in the cable.
•
Data Ready
— Indicates the transceiver has achieved power up and data is ready.
Page 112
