CHAPTER 2:
GETTING STARTED
This section will walk you through the steps to start managing your FS700TS-series switch. This section will cover how to get started in a network
with a DHCP server (most common) as well as if you do not have a DHCP server.
Network with DHCP server:
1.
Connect the FS700TS-series switch to a DHCP network.
2.
Power on FS700TS-series switch by plugging in power core.
3.
Install the Smart Wizard Discovery Utility program on your computer.
4.
Start the Smart Wizard Discovery utility. (Section 4 has detailed instructions on the Smart Wizard Discovery utility)
5. Click
Discover
for the Smart Wizard Discovery to find your FS700TS-series switch. You should see something similar to Figure 2-1.
Smart Wizard Discovery > Discover
Figure 2 - 1: Smart Wizard Discovery Utility Main Screen
6.
Select your switch by clicking on it. Then click on Web Access, as highlighted in Figure 2-2.
Page 4
