Model FB104 100 Mbps Network Starter Kit Installation Guide
1.
Turn the power off and unplug the power cord from your computer.
2.
Remove the PC cover.
3.
Choose an available PCI slot (PCI slots are the shorter slots) and remove the
corresponding back plate from the PC chassis.
4.
Insert the network card into the PCI expansion slot.
5.
Fasten the network card to the rear of the computer chassis by tightening the screw that
is on the PC.
6.
Replace the PC cover and reconnect the power cord to the PC.
Note:
Touch a grounded metal object to free yourself of static electricity before you
handle the network card.
Note:
To avoid damaging any components on the network card, handle it by the
edges, using your thumbs to push it securely into the PCI slot. Make sure the network
card is fully inserted into the slot to prevent the PC operating system from freezing at
startup.
Install a Network Card in Each PC
Network card
Back plate
removed
7983FA
Содержание FB 104
Страница 1: ......
