NETGEAR DG632 - ADSL Modem Router, Справочное руководство

Страница: 48 / 132

Reference Manual for the Model DG632 ADSL Modem Router
5-4 Using Modem Mode
• Select “Get Dynamically from ISP” if your ISP uses DHCP to assign your IP address.
Your ISP will automatically assign this address.
• If you know that your ISP does not automatically transmit DNS addresses to the modem
during login, select “Use these DNS servers” and enter the IP address of your ISP’s
Primary DNS Server. If a Secondary DNS Server address is available, enter it also.
A DNS server is a host on the Internet that translates Internet names (such as
www.netgear.com) to numeric IP addresses. Typically your ISP transfers the IP address of
one or two DNS servers to your modem during login. If the ISP does not transfer an
address, you must obtain it from the ISP and enter it manually here.
5.
Click Apply to save your settings.
6.
Click the Test button to test your Internet connection.
If the NETGEAR Web site does not appear within one minute, refer to Chapter 7,
“Troubleshooting .
ADSL Settings
The default settings of your DG632 ADSL Modem Router will work fine for most ISPs. However,
some ISPs use a specific Multiplexing Method or a Virtual Circuit Number for either the Virtual
Path Identifier (VPI) or Virtual Channel Identifier (VCI).
Note:
The correct country must be selected from the Setup Wizard’s first page for the default
ADSL Settings to work.
If your ISP provided you with a specific Multiplexing Method or VPI/VCI number, then fill in the
following:
1.
Select the ADSL Settings link from the main menu.
2.
For the Multiplexing Method, select LLC-based or VC-based.
3.
Type a number between 0 and 255 for the VPI. The default is 8.
4.
Type a number between 1 and 65535 for the VCI. The default is 35.
5.
Click Apply.
Modem Mode Network Management Information
The DG632 provides a variety of status and usage information which is discussed below.