NETEX NESiGate-CA, Справочное руководство

Страница: 24 / 34

Page 18 Web Browser Interface MAN-REF-CASW
Route Set Debug
This button sets the debug trace level globally, for the control stream or for a particular stream identified
by the Link Index. The Link Index can be obtained by first displaying the channel configuration with
the "Channel Display Interface Config" command.
VALUE:
0 : no console tracing
1 : console trace only H level messages
2 : console trace level H and M messages
3 : console trace level H, M, and L messages
4 : console trace level H, M, L, and D messages
5 : console trace the actual streams messages
6 : console trace the streams message data
7 : console trace all the data
global set Router debug level globally
control set Router debug level for the Router control stream.
L_INDEX set Router debug level for the stream linked under the Router at L_INDEX. L_INDEX
can be obtained by first displaying the channel configuration
Help Debug
This button displays help information for the "Route Set Debug" command in a separate window.
Route Add Route
This button defines a mapping of a GNA route to an IP address. If the GNA already has a route defined,
it will be changed.
Prior to selecting this button, provide the following data on the selection screen:
StartGNA specify the GNA address of the destination host.
IP Addr specify the IP address to which the StartGNA value should be routed.
Num specify the number of consecutive StartGNA addresses to route.
Chg running (temp) select this box to make a temporary change. The change will only re-
main in effect until the unit is restarted.
Chg file (perm) select this box to make a permanent change.