NETEX NESiGate-CA, Справочное руководство

Страница: 18 / 34

Page 12 Web Browser Interface MAN-REF-CASW
Channel Display Stats
This command displays statistics for a particular channel interface. Prior to selecting this button, pro-
vide the following data on the selection screen:
IFname
the name of the channel interface to display. If not specified, all defined chan-
nel interfaces are displayed.
Device# limit the display of the channel statistics to a particular device. For an ESCON
channel interface running in “configured” mode, this parameter is the Device
Index. For an ESCON channel interface running in “non-configured” mode, or
for a Bus & Tag channel interface, this parameter is an offset from the UADD
specification. If the UADD parameter is not used, this parameter is an offset
from the low-order byte of the startGNA address.
Example: specific interface
id txpacks txbytes rxpacks rxbytes
-------- -------- ------------ -------- ------------
2 0 0 0 0
txMiscEr rxMiscEr haltIO streamTo sysReset cmdRej intvReq
-------- -------- -------- -------- -------- -------- --------
0 0 0 0 0 0 0
busOutCk equipCk dataCk overRun delayTx delayRx dataTo
-------- -------- -------- -------- -------- -------- --------
0 0 0 0 0 0 0
where -
id : id for display only – minor number
txpacks : # messages sent to the channel
txbytes : # data bytes sent to the channel
rxpacks : # messages read from the channel
rxbytes : # data bytes read from the channel
txMiscEr : # transmit to the channel errors
rxMiscEr : # receive from the channel errors
haltIO : halt I/O count
streamTo : I/O streaming timeout count
sysReset : system reset count
cmdRej : command reject count
intvReq : intervention required count
busOutCk : bus out check count
equipCk : equipment check count
dataCk : data check count
overRun : overrun count
delayTx : # stream delayed messages destined for the channel
delayRx : # stream delayed messages coming from the channel
dataTo : data timeout count