YML739Rev1
V100LS User Guide
www.netcomm.com.au
9
Back Panel
NUMBER
LABEL
DESCRIPTION
Phone
Telephone jack (RJ-11) for connecting to an
analogue phone.
Power
For connecting to the power adapter that
comes with the package.
Reset
To reset your V100LS to its factory default
settings. (All customised settings that you
have saved will be lost!)
NOTE:
This will not erase your MyNetFone username and password and the SIP server
the ATA communicates with.
WAN
10/100 Base-T Ethernet Jack (RJ-45) for
connecting to your Broadband Modem,
Router or Switch.
NOTE:
Telstra and Optus Cable users must connect a DHCP enabled Router or Switch.
Resetting the V100LS ATA to its factory default settings:
■
Ensure that your V100LS ATA is powered on, indicated by the POWER indicator light.
■
Use a paper clip or a pencil tip to depress the reset button for at lest 5 seconds and then
release the button.
■
At this point, the WAN indicator light will begin flashing. The reset process is now in
progress.
■
When the WAN and POWER lights remain on and do not flash, it means that the reset
process is completed. The default settings are now restored.
