V100LS User Guide
YML739Rev1
4
www.netcomm.com.au
Introduction
Thank you for your purchase of NetComm's V100LS VoIP ATA (Analogue Telephone Adapter).
NetComm's V100LS offers the following features to the user:
■
Make telephone calls using their MyNetFone VoIP account.
■
Connect to a Switch or Router and use the Internet at the same time.
This guide covers installation of the V100LS in various scenarios and various broadband connection
types (ADSL or Cable).
Please read this section before installation
This assumes that your modem / router has a DHCP server running. If DHCP is not running, either
enable the DHCP service on your modem / router or you will need to run the configuration utility on
the CD-ROM to configure the V100 to work on your network.
The default IP address of the V100LS ATA is 192.168.1.100.
Please ensure you have the following checklist completed before connecting the V100LS ATA to
your network:
■
A DHCP compatible router or switch is required if you wish to use the internet at the same
time.
■
A spare Ethernet port on the router or switch attached to your modem.
■
A working broadband Internet connection. Consult an ISP if you do not have a broadband
connection.
■
Analogue telephone (e.g. Telstra phone or a DECT (cordless telephone) base station) to be
connected to the telephone (RJ11) port on the V100.
■
A microfilter is required if you have an ADSL connection and wish to connect another
telephone or facsimile directly to the line.
Note:
If you wish to use the caller ID feature, you will need a telephone with an LCD
screen.
