NetComm NTC-402, Руководство по настройке

Страница: 8 / 11

NTC-402 – Telstra Private IP WAN Configuration Guide 8 of 11
CG01068 v. 1.0 October 2018 © NetComm Wireless 2018
8 Enter the following details in this page:
I T E M D E S C R I P T I O N T E L S T R A S E T T I N G S
NAT Disable the NAT (Network Address Translation)
functionality.  Enable
Network Monitoring Disable the Network Monitoring functionality.

Enable
Table 3 – Virtual Server Rule Configuration page
9 Scroll to the bottom of the Internet Setup tabbed page and click the Save button to apply the changes you
have made.
Disable SPI
10 Open Security >> Firewall and click the Options tab:
Figure 5 – Basic Networking > WAN & Uplink > Internet Setup tabbed page
11 Enter the following details in this page:
Firewall Options
I T E M D E S C R I P T I O N T E L S T R A S E T T I N G S
SPI Disable the SPI (Stateful Packet Inspection, also known
as stateful firewall) functionality.

Enable
Allow Ping from WAN Enable so that ping tests can be performed over the
wireless IP WAN.

Enable
Table 4 – Firewall Options