NTC-402
–
Telstra Private IP WAN Configuration Guide
6 of 11
CG01068 v. 1.0 October 2018
© NetComm Wireless 2018
Change APN
3
Open Basic Network >> WAN & Uplink and click the Internet Setup tab:
Figure 2
–
Basic Networking > WAN & Uplink > Internet Setup tabbed page
4
Click the Edit button for WAN-1, additional groups of settings will display below the Internet Connection List
table.
5
Scroll down to the Connection with SIM-A Card section:
Figure 3
–
Connection with SIM-A Card section of the Internet Setup tabbed page
6
Enter the following details in this section of the page:
I T E M
D E S C R I P T I O N
T E L S T R A S E T T I N G S
Network Type
Use the default setting: Auto
Auto
Dial-Up Profile
Manual Configuration
–
this will open the APN field on the
next line.
Manual Configuration
APN
Enter the APN (Access Point Name) of your service
provider.
telstra.corp
