NTC-402
–
Telstra Private IP WAN Configuration Guide
10 of 11
CG01068 v. 1.0 October 2018
© NetComm Wireless 2018
b
Select WAN
Enable
c
Set the Service Port to 22
16
Click the Save button to apply the changes you have made.
Set LAN IP to Framed Route
17
Open Basic Network >> LAN & VLAN and click the Ethernet LAN tab:
Figure 7
–
Ethernet LAN configuration
18
Set the LAN IP Address to: 10.30.4.1
19
Set the Subnet Mask to: 255.255.255.0(24)
20
Click the Save button to apply the changes you have made.
Apply Settings - Refresh
21
Open the command line and type:
ipconfig /release
22
Press the Enter button.
Figure 8
–
Command Prompt: ipconfig /release
23
Wait until the system is reconfigured.
