YML854 Rev1
NB6, NB6W, NB6Plus4W
NB6, NB6W, NB6Plus4W
User Guide
www.netcomm.com.au
1
Here provides an example shown in the right column. Select TCP as the
Protocol
type, and make the
Source
and Destination IP address
to include All, then type 0 and 65535 as the
start and end port
.
A new IP filtering setting for Outbound traffic is created in the web page. To edit the setting, please click
to
get into the editing page. To delete the setting, click
to erase it. To set another IP filtering, click
Add
again.
To add a new Inbound IP Filtering, click
Inbound traffic
in the item of
Select the direction to filter packets
on
the
IP Filtering
page. Use the same way to add a new one as stated above.
