YML854 Rev1
NB6, NB6W, NB6Plus4W
NB6, NB6W, NB6Plus4W
User Guide
www.netcomm.com.au
4
MeR
Description:
In this deployment environment, we make up a private IP network of 192.168.1.1. NAT function is enabled to
support multiple clients to access to Internet.
In this example, the ADSL Router acts as a NAT device which translates a private IP address into a public
address. Therefore multiple users can share with one public IP address to access the Internet through this
router. The public address can be a static public address that is pre-assigned by ISP or a dynamic public
address that is assigned by the ISP DHCP server.
Configuration:
1.
Start your browser and type
192.168.1.1
in the URL box to access ADSL web-based manager.
2.
Go to
Quick Start
–
Quick Setup
. Uncheck
Auto Scan Internet Connection (PVC)
. Key in the
VCI
and
VPI
value, e.g.,
•
VPI
– 8
•
VCI
– 35
Then click the
Next
button.
3.
On the
Configure Internet Connection
–
Connection Type
page, select
Bridging
and then click the
Next
button.
4.
On the
WAN IP Settings
page, select
Obtain an IP address automatically
; then, select
Obtain DNS
server address automatically
.
5.
Check
Enable NAT
. Then click
Next
.
6.
On the
Configure LAN side Settings
page, key in the IP address and subnet mask for your LAN. Check
DHCP Server On
box, and enter the start and end points, e.g.:
Primary IP address
:192.168.1.1
Subnet Mask
:255.255.255.0
Start IP Address
:192.168.1.2
End IP Address
: 192.168.1.254
Then key in the leased time that you want. And click
Next
7.
Check the network information on the
Summary
page. Make sure the contents match the settings
provided by your ISP. Click
Finish
.
8.
Now the router is correctly configured. You can access the Internet.
