NetComm IAC3000, Руководство пользователя

Страница: 86 / 226

IAC3000
User’s Manual
82
o
Rule Number: This is the rule selected “1”. Rule No. 1 has the highest priority; rule No. 2 has the
second priority, and so on.
o
Rule Name: The rule name can be changed here.
o
Source/Destination – Interface/Zone: There are choices of ALL, WAN1 , WAN2 , Default , and
the named Service Zones to be applied for the traffic interface.
o
Source/Destination – IP Address/Domain Name: Enter the source and destination IP
addresses. Domain Host filtering is supported but Domain name filtering is not.
o
Source/Destination – Subnet Mask: Select the source and destination subnet masks.
o
Source- MAC Address: The MAC Address of the source IP address. This is for specific MAC
address filter.
o
Source/Destination – IPSec Encrypted: Check the box for only filtering on the encrypted traffic.
o
Service Protocol: There are defined protocols in the service protocols list to be selected.
o
Schedule: When schedule is selected, clients assigned with this policy are applied the firewall
rule only within the time checked. There are three options, Always , Recurring and One Time.
Recurring is set with the hours within a week.
o
Action for Matched Packets: There are two options, Block and Pass . Block is to prevent
packets from passing and Pass is to permit packets passing.
¾
Specific Route Profile: Click the button of Setting for Specific Route Profile , the Specific Route Profile
list will appear.
o
Route No.: The number of route.
o
IP Address (Destination): The destination IP address of the host or the network.
o
Subnet Netmask: Select a destination subnet netmask of the host or the network.
o
IP Address (Gateway): The IP address of the next router to the destination.