NetComm IAC3000, Руководство пользователя

Страница: 100 / 226

IAC3000
User’s Manual
96
4.3.2 AP Discovery
Use this function to detect and manage all of the APs in the network segments. Note that IAC3000 can only
manage APs that are connected to its LAN ports. Therefore, the AP discovery function is for adding locally
connected APs to its management list. The administrator must know the local IP addresses of the APs he/she
wishes to discover.
y
To discover AP manually, please fill in the required data.
¾
AP Type: Choose the type of AP you wish to discover.
¾
Interface: Set to default.
¾
Admin Settings Used to Discover: Choose from Factory Default or Manual.
¾
IP Addresses of APs after Discovery: Start assigning from this IP address to discovered APs.
Then click the Scan Now button and the APs match the given settings will show in the list below. If one of the
IP addresses intended is used, a warning message will show up. In this case, please change the IP range and
then click Scan Now again. Input the desired name and password for the AP. Select one template check it and
then click Add to add it under the managed list. (About the template, please see 4.3.4 Template Settings).
When the matched AP is discovered, it will show up in the list below and be given a new IP address set here
(ex: 192.168.25.1). Check the Add box to add the AP and it will be listed to the AP list. When an AP is added,
its MAC address will be automatically recorded into MAC Privilege List (please see 4.4.2 Privilege List) so its
management page can be accessed.
Click Configuring to go on the related configuration. For the details, please refer to 4.3.1 AP List .
y
Background AP Discovery: Click Configure to enter Background AP Discovery interface to go on related