NetComm 4GM3W страница 48 Скачать руководство пользователя

Страница: 48 / 65

NetComm Wireless 4GM3W User Guide

www.netcommwireless.com

SNMP

SNMP (Simple Network Management Protocol) is a protocol designed to give a user the capability to remotely manage a
computer network by polling and setting terminal values and monitoring network events.

OPTION

DEFINITION

Enable SNMP

You must check Local, Remote or both to enable SNMP function. If Local is checked, this device will only respond to requests

from LAN connected hosts. If Remote is checked, this device will respond to requests from the WAN connection.

Get Community

Sets the community string your device will respond to for Read-Only access.

Set Community

Sets the community string your device will respond to for Read/Write access.

IP 1, IP 2, IP 3, IP 4

Input your SNMP Management host IP here. You will need to configure the address where the device should send SNMP Trap

messages to.

SNMP Version

Please select proper SNMP Version that your SNMP Management software supports.

WAN Access IP Address

You can limit remote access to a specific IP address by entering it here.

Note: If "Remote" access is enabled, the default setting of 0.0.0.0 means any IP obtain SNMP protocol Information.

Click on Save to store your setting or Undo to discard your changes.

Содержание 4GM3W


































































Результаты поиска

Содержание 4GM3W

Отзывы:

Похожие инструкции для 4GM3W

Бренды по названию

Популярные бренды

NetComm 4GM3W, Руководство пользователя

Результаты поиска

Содержание 4GM3W

Отзывы:

Похожие инструкции для 4GM3W

Бренды по названию

Популярные бренды