NetComm 4GM3W Скачать руководство пользователя | Manualshive

Страница: 29 / 65

background image

www.netcommwireless.com

NetComm Wireless 4GM3W User Guide

29

Wireless 5GHz

The Wireless 5GHz LAN settings page allows you to configure the 5GHz wireless network features of the router.

OPTION

DEFINITION

Wireless Module

Select to enable or disable the Wireless network function of the 4GM3W.

Network ID (SSID)

Network ID is used for identifying the Wireless LAN (WLAN). Client stations can roam freely over this product and other
Access Points that have the same Network ID.

(Please refer to the included Wireless Security Card insert for your default SSID)

Wireless

Turns on or off the 5GHz wireless radio.

AP Isolation

When enabled, this isolates the wireless clients from other clients of the router so that they are inaccessible to each other.

SSID Broadcast

The router will broadcast the SSID so that wireless clients can find the wireless network.

Channel

The wireless radio channel in use by your network.

Wireless Mode

Choose A only, N only, A/N mixed or A/AN/AC mixed.

(The factory default setting is A/AN/AC mixed)

Authentication

You may select from the following authentication types to secure your wireless network:



Open



Shared



Auto



WPA



WPA-PSK



WPA2



WPA2-PSK



WPA/WPA2



WPA-PSK/WPA2-PSK.

WPA-PSK/WPA2-PSK is a newer type of security. This type of security gives a more secure network compared to WEP. Use
TKIP Encryption Type for WPA-PSK and AES for WPA2-PSK.
Please enter the key in the “Preshare Key”. The key needs to be more than 8 characters and less than 63 characters. It can

be any combination of letters and numbers.
(Please refer to the included Wireless Security Card insert for your default WPA-PSK2 key)

Encryption

The type of encryption to use on the wireless network. This may be AES, TKIP or AES/TKIP.

Pre-shared Key

The password to use for access to the 5GHz wireless network.

Note: The configuration for WPA-PSK and WPA2-PSK is identical

After configuring wireless security, you also need to configure your wireless adapter to use the same security settings before you

can connect wirelessly. Not all wireless adapters support WPA-PSK/WPA2-PSK/WPA/WPA2 security. Please refer to your
wireless adapter user guide for more information.

We strongly recommended that you set up wireless security such as WPA-PSK (when the wireless client supports WPA) in order
to secure your network.

Click Save to save these settings or click Undo to cancel.

«
...
27
28
29
30
31
...
»

Содержание 4GM3W


































































Отзывы:

Нет отзывов

Похожие инструкции для 4GM3W

Бренд: Paradyne Страницы: 20

Compshere 3000 Series

Бренд: Paradyne Страницы: 2

Бренд: Pantech Страницы: 17

Бренд: Vivotek Страницы: 136

Бренд: Leviton Страницы: 4

Бренд: Maipu Страницы: 19

Бренд: Maipu Страницы: 26

NetCon FBR-1409TX

Бренд: LevelOne Страницы: 88

Бренд: Baileigh Страницы: 20

Бренд: Juniper Страницы: 230

ControlCenter-IP 2.0

Бренд: G&D Страницы: 60

Бренд: Comtrend Corporation Страницы: 69

Бренд: New Media Technology Страницы: 26

SECURE BOOT STICK FX

Бренд: Ecos Страницы: 22

BIPAC-741 GE V2.0

Бренд: Billion Страницы: 108

Бренд: Crestron Страницы: 40

Бренд: Craftsman Страницы: 28

Бренд: Zte Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды