NetComm Wireless WSG-NF5, Руководство по установке

Страница: 42 / 42

Enabling Wireless Zero Configuration
Some wireless adapters have a 3rd party utility installed which controls the configuration and
connection profiles of the wireless adapter.
In these cases, it is necessary to enable a service called "
Wireless Zero Configuration ". The
steps to do this are listed below:
1. Click on the Start Menu. Click on “ Run ”, and type: services.msc <and then click
“ OK ”>.
2. Scroll down to the bottom of the list and locate the service called " Wireless Zero
Configuration " and double left click on it.
3. Change the " Startup type " to “ Automatic ”, and then check the " Service status "
below this;
- If the “
Service status ” is “ Started ”, click “ OK ”.
- If the “ Service status ” is “ Stopped ”, press the “ Start ” button on the lower left
side of the window and then wait until the service has started. When it has, click “ OK ”.
4. Close the Services window.